# How many stories a day to view on Telegram: masslooking limits

<https://teletraff.com/en/blog/telegram-masslooking-limits-per-day>

> Does Telegram cap story views, which ceilings you set yourself and how to work out a masslooking run from accounts, pauses and viewing depth.

TeleTraff editorial team · November 16, 2026 · 5 min read

- Telegram does not publish a stories-per-day number, you set the ceiling of a run
- A run stops at the smaller of two ceilings: the total and the sum across accounts
- Speed grows with the number of accounts, not by switching pauses off

Nobody can tell you exactly how many stories a day you can view on Telegram: Telegram publishes no such number, and the [«Mass story viewing»](/en/modules/masslook) module has no daily limit, only ceilings per run. Below: which fields set them, how to work out where your run stops, and where to start. For the price and the table of default settings see [Telegram masslooking: service and limits](/en/masslooking).

## Does Telegram limit story views?

Telegram does not publish that figure, and the panel has none. So the honest answer is that nobody can name a number per day that is fine, and any "this much is okay" is a guess. Telegram can restrict an account at any settings, especially one that was not warmed up. What you really control is the ceiling of a run, the number of accounts and the pace. Start there.

## Which ceilings do you set?

- «Stories per account» is how many stories one account takes per run.
- «Total limit» is the ceiling for the whole run. It is split between the accounts evenly.
- «People per channel or chat» is how many people to take from each source when the dataset holds the channel or chat itself.
- «Viewing depth» is how many seconds the account keeps a story open. If the story itself is shorter, the account waits only for its length.
- «Skip recently viewed» and «Do not repeat within» keep the account from returning to people it already viewed within the set hours.

## How do you work out the ceiling of a run?

The limits count stories viewed, not people. A run stops at the smaller of two numbers: the «Total limit», or «Stories per account» multiplied by the number of accounts. Example: four accounts at twenty stories each make eighty, so a total limit of two hundred and fifty is never reached. To reach the default total limit you need thirteen accounts: twelve times twenty is still below it, thirteen times twenty is above. If you raised «Stories per account» to the maximum but have few accounts, the total limit divided between them becomes the ceiling.

## How does the pace affect speed?

Each person costs the pause between views plus the viewing depth. The pause comes from the «Protection» block:

- «Fast» has the shortest pauses.
- «Balanced» has medium pauses.
- «Careful» has the longest, with spread.
- «Auto» starts at the Balanced pace and can slow an individual account down, it never goes faster than Balanced.

A calculation of people per hour for each profile and depth, made from the panel's values, is on the page [Telegram masslooking: service and limits](/en/masslooking). It is arithmetic, not a measurement: if people have several stories each, real speed is lower.

## Where do you start the first run?

1. **Take a small dataset.** Start with a short list of people, not the whole dataset. Open [«Mass story viewing»](/en/modules/masslook) and pick a saved dataset.
2. **Keep the defaults.** Do not raise the limits until you have seen a result. Do not set the depth to zero: zero is the most visible sign of automation.
3. **Pick a protection profile.** For accounts that were not warmed up take «Careful» or leave «Auto». [Warm up](/en/modules/auto-warmup) the accounts first.
4. **Read the run summary.** Open the per-target log. Every skip has a reason written down, for example «No new stories.»
5. **Grow with accounts.** If you need speed, add accounts instead of removing pauses.

## Why did the run stop earlier than you expected?

- «Stories per account» was hit on every account: the sum across them was smaller than the total limit.
- The «Total limit» was hit: each account got less than you set.
- Many people have no live stories: a minority posts them, especially on a dataset without the «Premium only» filter.
- The stories are closed by Telegram privacy settings.

> **About risk**
>
> Picking the number of stories does not insure an account against restrictions: Telegram decides what looks suspicious. Start small, read the run summary and do not turn on reactions on a cold dataset until you have seen a result.

## FAQ

**How many stories a day can I view on Telegram?**

Telegram publishes no such number and the panel has no daily limit: you set the ceiling of a run with the «Stories per account» and «Total limit» fields. Start with a small run and read the summary.

**Why did the run end below the total limit?**

The total limit is split between the accounts and each has its own ceiling, «Stories per account». The run stops at the smaller of the two values. Add accounts or raise the per-account ceiling.

**Can I speed masslooking up by removing pauses?**

You can choose the «Fast» profile, but removing pauses and setting a zero depth is not worth it: that pace shows automation. Adding accounts is more reliable.

**Where can I see how many people an account passes per hour?**

A table with the calculation per protection profile is on the page [Telegram masslooking: service and limits](/en/masslooking). It is arithmetic on the panel's values, not a measurement.

**What if most people have no stories?**

That is a property of the dataset, not a fault. Build the dataset in the parser with the «Premium only» filter: such accounts have stories more often.
